![]() Only applies to the “H-pattern (7+1)” shift plate.M: Slot for easier positioning of the shift plates. Keep this area clean in order to avoid any detection problems. Is pressed automatically when the “Sequential (+/-)” shift plate is installed. L: Button which automatically detects the type of shift plate used (C or D). K: 2 screws which hold the internal structure in place (do not unscrew). ![]() J: 4 “screw threads” to attach the shift plates (C or D). Notes regarding the internal structure’s top cover: Screw the gear shift knob back on (clockwise).Ĭarry out this procedure in reverse to replace the “H-pattern (7+1)” shift Using the included 2.5 mm Allen key (E), replace and completely retighten the 4 screws holding the “Sequential (+/-)” shift plate in place. Next, install the “Sequential (+/-)” shift plate. Manually rotate the internal structure 90° to the right (clockwise). During this procedure, take care not to accidentally let any of the screws fall inside the internal mechanism. Using the included 2.5 mm Allen key (E), completely unscrew and remove the 4 screws holding the “H-pattern (7+1)” shift plate in place. Unscrew (counterclockwise) and remove the gear shift knob (A). SWITCHING FROM THE “H-PATTERN (7+1)” SHIFT PLATE TO THE “SEQUENTIAL Retighten the 4 screws holding the shift plate in place. The shift plate can now be rotated manually by 360°. Using the included 2.5 mm Allen key (E), slightly unscrew the 4 screws holding the shift plate (C or D) in place. POSITIONING AND ROTATING THE SHIFT PLATES (CAN BE ADJUSTED BY 360°) (in the ‘Wheels/TH8A Shifter/Manual / Help file’
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |